Because there are so many choices on the market, commercial overhead door replacement can be confusing. Doors can vary in size, quality, construction and price. When you replace metal roll-up doors, you don’t want to have to worry about them for many years to come.
Continue Reading Add comment January 11th, 2012
Comparing the features of metal roll-up doors before you buy will ensure trouble-free operation over time.
Continue Reading Add comment September 21st, 2011
As you seek ways to improve the exterior integrity of your home, consider replacing your older garage doors. Are your currentgarage doors cracking or sagging, or are they difficult to open and close? Do you feel insecure because your garage doors no longer offer the security and protection they should provide due to aging? If you answered, “yes” to these questions, then it’s probably time to replace your garage doors.
Not only do garage doors provide a sense of security, but new doors can tremendously improve the outside appearance of your home. You can select from a variety of styles, colors and materials, including space-saving overhead doors. Garage doorscan match the outside colors of your home (whether brick, wood or siding), and can be customized to get the look and feel you want.
Materials for Garage doors
Consider these materials when selecting new garage doors: steel, wood, fiberglass or aluminum. Each material offers advantages, but steel and wood tend to be the more popular choices among homeowners. Steel garage doors are the strongest and most durable. They require very little maintenance because most are made of galvanized steel that is hot-dipped and clad with vinyl or have a polyester (baked on) finish. This means the doors will not require re-painting and they will not rust. Some higher quality steel garage doors are also filled with insulation, which offers warmth in winter and coolness in summer for the inside of your garage. Look for Clopay doors and compare their styles such as the Gallery Collection or the Grand Harbor Collection to find amazing designs and colors.
The only drawback to steel doors is that steel can become dented if you accidently hit the doors with your car or motorcycle…or even if one of the kids rams a bike into the door too hard. If your steel doors become dented, they may be difficult to repair.
If you want a contemporary look, consider the aluminum/glass design in the Avante Collection. Or, if you want steel doors that offer a wood carriage-house style look and feel, consider the Coachman Collection by Clopay doors. For custom wood garage doors, you can’t go wrong with the Clopay Reserve Collection. These beautiful wood doors come in cedar, redwood, or hemlock with a lovely tongue and groove design. They are also weather-sealed for added protection from outdoor elements.
Custom Designs
No matter which material you choose, there are usually a number of options to customize your garage doors. Garage door windows may be arched, square or rectangular in shape. There are also wrought iron window options with many choices…from plain short designs to long square or rectangular grilles. You may also have an option to buy antique black iron hardware for the classic wood or steel garage doors. Choose garage colors, panel designs or wood-grain styles, and garage doorsaccessories such as reliable openers to meet your needs while enhancing the overall look of your home.
You’ll be “wowed” by the difference new garage doors can make for your home’s exterior. Check out various brands online such as Clopay doors, Wayne Dalton doors, and Amarr doors. You’ll soon enjoy the ease and comfort of new, stylish garage doors!
To learn more about subjects like garage doors please visit the web site at: http://www.directgaragedoors.com
Add comment August 28th, 2010
Telephone:1-352-243-0180
Toll Free: 1-877-RLDOORS
Toll Free 1-877-753-6677
“We sell Roll Up Doors Direct to You At Factory Direct Pricing”
Add comment May 1st, 2008
Door Maintenance And Repair
Protect Your Facility’s Investment
By Chip Cordes
Few businesses have as many doors to maintain as a self-storage site. With over 50,000 facilities in the U.S., imagine how many roll-up storage doors are out there! Perhaps tens of millions. The job of regular maintenance of these millions of doors generally falls on the shoulders of self-storage managers and maintenance personnel … so let’s roll up our sleeves and learn how to maintain them properly.
Self-storage facilities use different types of doors that all require some type of preventative maintenance to ensure a long life of trouble-free operation. These doors include hollow metal personnel doors at building entry points, swing doors on smaller interior units, sectional doors found at first-generation facilities and on today’s larger commercial and boat/RV units, and the industry’s most popular door—the sheet roll-up door found on millions of self-storage units around the globe.
Whichever type of door you are maintaining, understanding how the door operates and taking proper steps to maintain it will make your job easier since it can virtually eliminate customer complaints about door operation. Moreover, regular maintenance will protect your owner’s significant investment in this equipment.
Hollow Metal Doors Hollow metal doors typically have three hinges bolted or welded to a metal frame. Hardware includes a locking device, handles for open and closing, and many times, an automatic closure mechanism that helps close the door after someone operates it. To keep the door square in the opening, Make sure the fasteners are tightened on all operational parts, including the hinges and lock mechanism.
Also, installing a spring-loaded chain at the top of the door prevents unnecessary maintenance caused by overextension when opening. Remember that the hinges are designed to open the door only so far. Exceeding this maximum position typically will bend the hinges, twist the frame, and cause the door to rub with each operation. A maintenance checklist for hollow metal doors includes securing fasteners; inspecting hinges for signs of wear or extension and replacing them as needed; lubricating hinges and locking mechanisms; inspecting the rubber seal on the bottom of the door; and inspecting for de-lamination or rust due to exposure to the elements.
Most hollow metal doors are not manufactured from galvanized steel, so they require more attention to exposure to water, snow, and salt. Remember, although unit doors are only used each time a customer visits the facility, every renter in a hallway uses the hollow metal door at the point of entry. These doors tend to get the majority of traffic in a facility and they require the closest attention to prescribed maintenance.
Corrugated Swing Doors
Corrugated swing doors on interior units typically are manufactured from the same pre-painted corrugated sheets as roll-up doors, and are assembled with galvanized channel frames that hold the corrugated sheets into a swing door slab. They are intended for interior use only as they do not offer a weatherproof jamb or bottom weather seal.
Most swing doors have factory installed hinges welded or bolted to the door slab and bolted, screwed, or riveted to the hallway pier or component. The hinges are designed to operate a full 180 degrees, allowing the doors to fully open. Close inspection of the hinges is important to ensure that the fasteners are tight. A few drops of a silicone-based spray or liquid helps the hinges remain corrosion resistant and operate freely. In addition, these doors typically have a cylinder-type locking mechanism or a standard mini-lock latch suitable for padlocks. It is important that the lock is tightly fastened to the door slab. Some manufacturers provide a full-width security plate on the interior side of the door slab, ensuring that the lock cannot be removed by simply pulling the latch bolts through the corrugated skin. If your door does not a security plate, install over-sized washers to minimize this risk. Check the door to make sure it is square, making minor adjustments to fit it properly to the opening. Test the locking mechanism for a smooth operation with the door both open and closed.
Roll-Up Doors
Roll-up doors have become the industry standard for both exterior and interior unit access. They are manufactured from multiple light-gauge, galvanized, pre-painted corrugated sheets seamed together and coiled around a spring-loaded barrel assembly to raise and lower the door. Steel channel-like guides attached to the wall on both sides of the opening provide both vertical alignment and containment. The concept is the same with all manufacturers of roll-up doors—only aesthetic appearance and operational designs separate the several models available in the market today.
Although all of the roll-up models operate with the corrugated sheet rolling around a drum or barrel (much like a window shade rolls around a tube at the top of a window), various manufacturers have developed different techniques to achieve the same result. The barrel is constructed of galvanized steel drums welded to a common shaft that spans the width of the opening and is attached to the wall by two galvanized mounting plates. The center of the barrel consists of a hollow shaft around which all the components are attached. A spring is attached to the shaft that counterbalances the weight of the door’s curtain.
The spring will turn the shaft, which is also attached to the curtain. As the door opens, it rolls around the shaft and stays tucked neatly inside the storage unit above the door opening. Many of these doors have been in operation for more than 20 years and are still functioning. Nevertheless, customers throw them up, slam them down, run into them, stack boxes so they fall against the doors, and generally operate them with careless disregard. This is why periodic maintenance is required to keep roll-up doors working like new.
Roll-Up Maintenance
There are two basic types of operating mechanisms for today’s roll-up doors. In the first example, the shaft of the door is “live” and spins inside a bearing or bushing while the curtain wraps itself around a barrel assembly attached permanently to the shaft. In the second type, the shaft of the door is “dead” or fixed permanently to its MARCH/APRIL 2008 SELF-STORAGE NOW! 25 supporting wall bracket and the barrel assembly rotates around the fixed shaft. Either way, the end result is that the door curtain opens and closes.
The “fixed” shaft types contain bearings or bushings that turn while supporting the weight of the door curtain. They require periodic lubrication even if they are not used for long periods. In fact, not using a door is sometimes more detrimental than consistent use, as the components sit with all the weight and spring tension applied in a fixed position. Use silicone- based lubricants as they do not attract or retain dust and dirt particles; heavier lubricants can actually build up with each application.
The “live” shaft door has a tubular pipe protruding through both wall support brackets that turns with each revolution of the barrel assembly. Support brackets have evolved over the years from a steel-on-steel application to nylon bushings and eventually to radial bearing surfaces. The steel-on-steel application requires more lubrication than do the other types. Perform a close inspection and adequate lubrication after each move-out to ensure that there is no premature wearing of the axle or bracket surface.
Doors with nylon bushings will need minimal lubrication and will have minimal surface wear. Bearings, the latest trend, offer a smooth operation at all points during door travel. These, too, need periodic lubrication to ensure that the bearings do not dry out and are ready to operate.
Whether a door has a fixed or live shaft, both utilize springs to act as counter-balances for the weight of the curtain. If the springs are encapsulated at the factory within the drum assembly, they are lubricated during assembly. However, if the spring is exposed, a light amount of silicone or oil will resist surface corrosion but probably not enhance the door’s operation. If a door is not working properly, it is either the spring’s tension adjustment, curtain friction in the guides, or the curtain’s point of entry. Inspect the guides, making sure they are not damaged or in a way that impedes the door’s operation.
Proper Alignment And Spacing
Check the alignment of the door curtain and wall support bracket. If a wall fastener works its way loose or fails, this could allow the bracket to shift position, rubbing the door curtain during operation. Simple repairs can often be completed by a local handyman; however, spring replacement or curtain alignment should be left to properly-trained personnel.
As the door curtain rolls up on the barrel assembly, it is important to provide adequate spacing between the coils of the curtain and guarantee the following: (1) the door curtain wraps in a symmetrical manner, providing a consistent operation of the door; (2) the curtain does not rub itself during operation, scratching or damaging the finished paint surface; and (3) the door curtain does not have any metalto- metal contact inside the guides during operation.
Some manufacturers apply strips of wool pile on the inside of the door curtain with self-adhesive tape that supports the curtain while it rolls up, providing adequate space between the curtain coils. To protect the prefinished paint on the door curtain, inspect these strips after each tenant move-out, repairing or replacing them as required. Other manufacturers provide a polypropylene wear strip stapled to the edge of the curtain to achieve this same spacing affect. Hidden inside the guide, where it also prevents metal-to-metal contact with the guide system, this wear-strip is visible from inside the unit when the door is in the open position. Inspect this edge strip as well for proper alignment and attachment.
Weather-Sealing
There are two types of weather seal attached to the bottom bar of each roll-up door. Both are extruded vinyl, one with a round or “bulb” shape and the other, a single-ply or flat strip. Both act as a deterrent to nature’s elements entering the units under the door curtain. Manufacturers use different extrusion shapes, requiring you to purchase the appropriate replacement seals. Inspect the weather seal for wear, corrosion, or tears. Replace as required by sliding it out of the bottom bar extrusion either above the door stops or through the lock hole. This may require prying open the end of the extrusion.
If you remove the bottom bar above the door stops, be careful to adequately re-tighten the stops when you reinsert the curtain into the guides. These stops should always remain tight and in proper alignment, securely stopping the door at the top of each operation without the fear of it leaving the guides unintentionally. Tighten them to the standards suggested in the installation or service manual for the door model.
Tension Adjustments
The most common question about rollup doors concerns the proper door tension and the use of tension adjustment systems. The proper amount of tension is a personal preference. Many renters close the door but forget to lock it if the door will stay in a fully closed position without the lock being engaged. Also, the primary reason for the roll-up curtain to “balloon” or not roll symmetrically while opening is the lack of adequate tension on the spring.
One popular option has a built-in security measure by having the door rise about 12 inches above the floor when the door is in the unlocked position, which serves as a visual reminder that the door isn’t locked. Roll-up doors are best balanced when they are half-open, and any door placed in this position should be able to stay there without any assistance or propping. The practice of having the door open 12 to 18 inches when the lock is disengaged will ensure that the proper amount of tension is preset on the door at all times.
As for adjustment of the tension of door springs, the introduction of various tension adjusters over the last 10 years has greatly enhanced the ease with which qualified personnel can adjust doors. Spring adjustment should only be attempted by trained personnel, and safety should always be the first concern when attempting to make adjustments to any model of roll-up door.
If you have any questions regarding proper care and maintenance of your facility’s doors, don’t hesitate to call your vendor for guidance.
Chip Cordes is Vice President of U.S. Door & Building Components, a self-storage product manufacturer based in Orlando, Florida.
Instant Unit Mix and Financial Scenarios Available Using Virtual Self-Storage Design Studio
U.S. Door & Building Components once again maintains leadership in the self-storage industry by introducing a Virtual Design Studio. Participants are able to immediately see how changing their designs will affect their unit mix design and self-storage project return on investment.
“We are now able to work in real-time with our customers”, said Charles “Chip” Cordes, Vice President of U.S. Door & Building Components. “The ability to change unit mixes, discuss different scenarios and show the results instantly saves time and helps our customers understand the best layout for their facility.”
Additional features include financial modeling based on different “what if” scenarios. Monthly and yearly returns can be calculated immediately on-line. The program used allows the customer to navigate to www.gotomeeting.com and click on “Join a Meeting”. With the provided access number, the participant will be live on screen with a representative from U.S. Door. In addition to unit mixes, participants can see “snap shot proformas”, pictures and any other items of interest or relevance to a project.
“I was able to fully participate in the design and control the mouse and screen from my location, said Jeff McClanahan, Managing Partner of W.B. McClanahan and Associates. “Once the scenario and unit mix discussion was completed, I received an e-mail with the final copy.”
To schedule a Virtual Design Studio appointment with U.S. Door, For further details, Call 352 243 0180.
U.S. Door & Building Components has been a major international supplier to the self-storage industry for over 30 years. In addition to supplying Roll-Up doors, they offer a complete portfolio of related products including hallway and corridor systems, swing doors, lockers, EZ Access wicket doors, relocatable buildings and mezzanine systems. All products are available with factory-guaranteed installation.
US Door & Building Components Showcasing a New Logo
U.S. Door & Building Components has established a new company logo.
“Our branding message as a global leader in self-storage solutions is more predominant with our new logo. It reflects our broad product line more effectively by making Building Components a larger portion of the overall design”, said John McLane, President of U.S. Door & Building Components.
The logo will begin appearing in advertisements, case studies and other public relations starting immediately.U.S. Door & Building Components is slated to introduce in 2008 an expanded commercial door line and will continue to develop its building component solutions.
U.S. Door & Building Components has been a major international supplier to the self-storage industry for over 30 years. In addition to supplying roll-up doors, they offer a complete portfolio of related products including hallway and corridor systems, swing doors, lockers, EZ Access wicket doors, relocatable buildings and mezzanine systems. All products are available with factory-guaranteed installation.
US Door Stackable Locker Systems
US Door & Building Components, “A Building Products Specialty Company” is an international supplier of self-storage and building components, including one of the newest additions to our line of building and storage systems, our Stackable Locker Systems. These easy to assemble Do It Yourself kits can be individually boxed and shipped for quick delivery. Manufactured completely out of pre-painted galvanized steel with factory pre-punched bolt locations for quick and consistent assembly. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For more information on this and all of our building and storage systems call For further details, Call 352 243 0180
US Door Value Storage Hallway Systems
US Door & Building Components, “A Building Products Specialty Company” is an international supplier of self-storage and building components, including our proven Value Storage Interior Hallway Systems. This system features our corrugated or flush, pre-painted galvanized steel panels. All of our hallway systems are built to your specifications for that specific custom look. All of our hallway systems feature full width top and bottom channels as well as multiple stiffeners and braces to deliver the strongest hallway system possible. Services include engineering, design, bid take-off, and unit mix layout. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For more information on this and all of our building and storage systems For further details, Call 352 243 0180
US Door ACCESS-A-DECK MEZZANINE SYSTEMS
US Door & Building Components is an international supplier of light-gauge steel building components, rolling steel doors, wind load certified doors, interior hallway and corridor systems, garage storage systems, stackable storage lockers, portable storage buildings, structural pier/header systems, and structural mezzanine systems.
The Access-A-Deck Structural Storage & Mezzanine Systems can be configured to fill an entire warehouse or just a portion for that additional custom storage space needed. The Full Mezzanine System is engineered to maximize the total number of rental units, while only requiring an unobstructed minimum eve height of fifteen feet with a suitable floor structure. The Island System, which best utilizes existing HVAC & Lighting typically found in warehouses today, can be joined with bridges and material lifts to provide convenient access to every unit. The Access-A-Deck Storage System was designed to provide clean and secure self-storage in a typical commercial warehouse application. These structural mezzanine designs are engineered on a 10’ by 10’ grid allowing for a 125 PSF floor load rating to be achieved. In addition, most systems qualify as re-locatable racking or storage systems making these mezzanines eligible for accelerated depreciation. With increased rental cash flow and early depreciation, Access-A-Deck Mezzanine Systems make sense.
Services include engineering, design, bid take-off, and unit mix layout. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For further details, Call 352 243 0180
US Door Introduces Model 502 Door for the Self Storage and Retail Markets
US Door & Building Components has introduced the Model 502 Roll-Up Door for the self-storage and the retail do-it-yourself consumer markets. While the new Model 502 Door is similar to the current line of self-storage roll-up doors offered by US Door, the new door has a fully enclosed barrel and new easy to adjust tension device.
The Model 502′s new galvanized steel barrel surrounds the axle, drums and a fully lubricated spring assembly. The state-of-the-art US Door barrel provides even lifting along the width of the door opening and a protective barrier against barrel dents.
The Model 502 Roll-Up Door is easy to install, operate maintain. The door comes in 22 pre-finished colors and has a finished clean look. The door is available in a variety of sizes to fit all applications.
The new door will supplement US Door’s self-storage product line, including the existing Models 501, 501-23, 501-30 and 566 Self Storage Roll-Up Doors. A Windload Rated version of the new door is available, the Model 502-30.
The new Model 502 Door can be mounted to wood, masonry, or steel jambs. Available for areas of up to 100 square feet, 10 feet (32.8 m) wide by 10 feet (32.8 m) high, the Model 502 looks just like other US Door models, allowing its use with other models on the same project.
The Model 502 optional features include: electric operators to provide maximum opening convenience and effortless operation; the hoist offers an economical alternative to manually operated doors.
The applications for US Door products are various as they can be used on a variety of projects including residential, agricultural, retail, educational or other steel building projects. Smooth operation, easy installation and reliable performance, and nationwide distribution will make the Model 502 the go-to door of choice for customers.
For further details, Call 352 243 0180
Roll Up Doors Direct 1-352-243-0180
Roll Up Doors Direct
www.RollUpDoorsDirect.Com
Add comment May 1st, 2008
Door Maintenance And Repair
Protect Your Facility’s Investment
By Chip Cordes
Few businesses have as many doors to maintain as a self-storage site. With over 50,000 facilities in the U.S., imagine how many roll-up storage doors are out there! Perhaps tens of millions. The job of regular maintenance of these millions of doors generally falls on the shoulders of self-storage managers and maintenance personnel … so let’s roll up our sleeves and learn how to maintain them properly.
Self-storage facilities use different types of doors that all require some type of preventative maintenance to ensure a long life of trouble-free operation. These doors include hollow metal personnel doors at building entry points, swing doors on smaller interior units, sectional doors found at first-generation facilities and on today’s larger commercial and boat/RV units, and the industry’s most popular door—the sheet roll-up door found on millions of self-storage units around the globe.
Whichever type of door you are maintaining, understanding how the door operates and taking proper steps to maintain it will make your job easier since it can virtually eliminate customer complaints about door operation. Moreover, regular maintenance will protect your owner’s significant investment in this equipment.
Hollow Metal Doors Hollow metal doors typically have three hinges bolted or welded to a metal frame. Hardware includes a locking device, handles for open and closing, and many times, an automatic closure mechanism that helps close the door after someone operates it. To keep the door square in the opening, Make sure the fasteners are tightened on all operational parts, including the hinges and lock mechanism.
Also, installing a spring-loaded chain at the top of the door prevents unnecessary maintenance caused by overextension when opening. Remember that the hinges are designed to open the door only so far. Exceeding this maximum position typically will bend the hinges, twist the frame, and cause the door to rub with each operation. A maintenance checklist for hollow metal doors includes securing fasteners; inspecting hinges for signs of wear or extension and replacing them as needed; lubricating hinges and locking mechanisms; inspecting the rubber seal on the bottom of the door; and inspecting for de-lamination or rust due to exposure to the elements.
Most hollow metal doors are not manufactured from galvanized steel, so they require more attention to exposure to water, snow, and salt. Remember, although unit doors are only used each time a customer visits the facility, every renter in a hallway uses the hollow metal door at the point of entry. These doors tend to get the majority of traffic in a facility and they require the closest attention to prescribed maintenance.
Corrugated Swing Doors
Corrugated swing doors on interior units typically are manufactured from the same pre-painted corrugated sheets as roll-up doors, and are assembled with galvanized channel frames that hold the corrugated sheets into a swing door slab. They are intended for interior use only as they do not offer a weatherproof jamb or bottom weather seal.
Most swing doors have factory installed hinges welded or bolted to the door slab and bolted, screwed, or riveted to the hallway pier or component. The hinges are designed to operate a full 180 degrees, allowing the doors to fully open. Close inspection of the hinges is important to ensure that the fasteners are tight. A few drops of a silicone-based spray or liquid helps the hinges remain corrosion resistant and operate freely. In addition, these doors typically have a cylinder-type locking mechanism or a standard mini-lock latch suitable for padlocks. It is important that the lock is tightly fastened to the door slab. Some manufacturers provide a full-width security plate on the interior side of the door slab, ensuring that the lock cannot be removed by simply pulling the latch bolts through the corrugated skin. If your door does not a security plate, install over-sized washers to minimize this risk. Check the door to make sure it is square, making minor adjustments to fit it properly to the opening. Test the locking mechanism for a smooth operation with the door both open and closed.
Roll-Up Doors
Roll-up doors have become the industry standard for both exterior and interior unit access. They are manufactured from multiple light-gauge, galvanized, pre-painted corrugated sheets seamed together and coiled around a spring-loaded barrel assembly to raise and lower the door. Steel channel-like guides attached to the wall on both sides of the opening provide both vertical alignment and containment. The concept is the same with all manufacturers of roll-up doors—only aesthetic appearance and operational designs separate the several models available in the market today.
Although all of the roll-up models operate with the corrugated sheet rolling around a drum or barrel (much like a window shade rolls around a tube at the top of a window), various manufacturers have developed different techniques to achieve the same result. The barrel is constructed of galvanized steel drums welded to a common shaft that spans the width of the opening and is attached to the wall by two galvanized mounting plates. The center of the barrel consists of a hollow shaft around which all the components are attached. A spring is attached to the shaft that counterbalances the weight of the door’s curtain.
The spring will turn the shaft, which is also attached to the curtain. As the door opens, it rolls around the shaft and stays tucked neatly inside the storage unit above the door opening. Many of these doors have been in operation for more than 20 years and are still functioning. Nevertheless, customers throw them up, slam them down, run into them, stack boxes so they fall against the doors, and generally operate them with careless disregard. This is why periodic maintenance is required to keep roll-up doors working like new.
Roll-Up Maintenance
There are two basic types of operating mechanisms for today’s roll-up doors. In the first example, the shaft of the door is “live” and spins inside a bearing or bushing while the curtain wraps itself around a barrel assembly attached permanently to the shaft. In the second type, the shaft of the door is “dead” or fixed permanently to its MARCH/APRIL 2008 SELF-STORAGE NOW! 25 supporting wall bracket and the barrel assembly rotates around the fixed shaft. Either way, the end result is that the door curtain opens and closes.
The “fixed” shaft types contain bearings or bushings that turn while supporting the weight of the door curtain. They require periodic lubrication even if they are not used for long periods. In fact, not using a door is sometimes more detrimental than consistent use, as the components sit with all the weight and spring tension applied in a fixed position. Use silicone- based lubricants as they do not attract or retain dust and dirt particles; heavier lubricants can actually build up with each application.
The “live” shaft door has a tubular pipe protruding through both wall support brackets that turns with each revolution of the barrel assembly. Support brackets have evolved over the years from a steel-on-steel application to nylon bushings and eventually to radial bearing surfaces. The steel-on-steel application requires more lubrication than do the other types. Perform a close inspection and adequate lubrication after each move-out to ensure that there is no premature wearing of the axle or bracket surface.
Doors with nylon bushings will need minimal lubrication and will have minimal surface wear. Bearings, the latest trend, offer a smooth operation at all points during door travel. These, too, need periodic lubrication to ensure that the bearings do not dry out and are ready to operate.
Whether a door has a fixed or live shaft, both utilize springs to act as counter-balances for the weight of the curtain. If the springs are encapsulated at the factory within the drum assembly, they are lubricated during assembly. However, if the spring is exposed, a light amount of silicone or oil will resist surface corrosion but probably not enhance the door’s operation. If a door is not working properly, it is either the spring’s tension adjustment, curtain friction in the guides, or the curtain’s point of entry. Inspect the guides, making sure they are not damaged or in a way that impedes the door’s operation.
Proper Alignment And Spacing
Check the alignment of the door curtain and wall support bracket. If a wall fastener works its way loose or fails, this could allow the bracket to shift position, rubbing the door curtain during operation. Simple repairs can often be completed by a local handyman; however, spring replacement or curtain alignment should be left to properly-trained personnel.
As the door curtain rolls up on the barrel assembly, it is important to provide adequate spacing between the coils of the curtain and guarantee the following: (1) the door curtain wraps in a symmetrical manner, providing a consistent operation of the door; (2) the curtain does not rub itself during operation, scratching or damaging the finished paint surface; and (3) the door curtain does not have any metalto- metal contact inside the guides during operation.
Some manufacturers apply strips of wool pile on the inside of the door curtain with self-adhesive tape that supports the curtain while it rolls up, providing adequate space between the curtain coils. To protect the prefinished paint on the door curtain, inspect these strips after each tenant move-out, repairing or replacing them as required. Other manufacturers provide a polypropylene wear strip stapled to the edge of the curtain to achieve this same spacing affect. Hidden inside the guide, where it also prevents metal-to-metal contact with the guide system, this wear-strip is visible from inside the unit when the door is in the open position. Inspect this edge strip as well for proper alignment and attachment.
Weather-Sealing
There are two types of weather seal attached to the bottom bar of each roll-up door. Both are extruded vinyl, one with a round or “bulb” shape and the other, a single-ply or flat strip. Both act as a deterrent to nature’s elements entering the units under the door curtain. Manufacturers use different extrusion shapes, requiring you to purchase the appropriate replacement seals. Inspect the weather seal for wear, corrosion, or tears. Replace as required by sliding it out of the bottom bar extrusion either above the door stops or through the lock hole. This may require prying open the end of the extrusion.
If you remove the bottom bar above the door stops, be careful to adequately re-tighten the stops when you reinsert the curtain into the guides. These stops should always remain tight and in proper alignment, securely stopping the door at the top of each operation without the fear of it leaving the guides unintentionally. Tighten them to the standards suggested in the installation or service manual for the door model.
Tension Adjustments
The most common question about rollup doors concerns the proper door tension and the use of tension adjustment systems. The proper amount of tension is a personal preference. Many renters close the door but forget to lock it if the door will stay in a fully closed position without the lock being engaged. Also, the primary reason for the roll-up curtain to “balloon” or not roll symmetrically while opening is the lack of adequate tension on the spring.
One popular option has a built-in security measure by having the door rise about 12 inches above the floor when the door is in the unlocked position, which serves as a visual reminder that the door isn’t locked. Roll-up doors are best balanced when they are half-open, and any door placed in this position should be able to stay there without any assistance or propping. The practice of having the door open 12 to 18 inches when the lock is disengaged will ensure that the proper amount of tension is preset on the door at all times.
As for adjustment of the tension of door springs, the introduction of various tension adjusters over the last 10 years has greatly enhanced the ease with which qualified personnel can adjust doors. Spring adjustment should only be attempted by trained personnel, and safety should always be the first concern when attempting to make adjustments to any model of roll-up door.
If you have any questions regarding proper care and maintenance of your facility’s doors, don’t hesitate to call your vendor for guidance.
Chip Cordes is Vice President of U.S. Door & Building Components, a self-storage product manufacturer based in Orlando, Florida.
Instant Unit Mix and Financial Scenarios Available Using Virtual Self-Storage Design Studio
U.S. Door & Building Components once again maintains leadership in the self-storage industry by introducing a Virtual Design Studio. Participants are able to immediately see how changing their designs will affect their unit mix design and self-storage project return on investment.
“We are now able to work in real-time with our customers”, said Charles “Chip” Cordes, Vice President of U.S. Door & Building Components. “The ability to change unit mixes, discuss different scenarios and show the results instantly saves time and helps our customers understand the best layout for their facility.”
Additional features include financial modeling based on different “what if” scenarios. Monthly and yearly returns can be calculated immediately on-line. The program used allows the customer to navigate to www.gotomeeting.com and click on “Join a Meeting”. With the provided access number, the participant will be live on screen with a representative from U.S. Door. In addition to unit mixes, participants can see “snap shot proformas”, pictures and any other items of interest or relevance to a project.
“I was able to fully participate in the design and control the mouse and screen from my location, said Jeff McClanahan, Managing Partner of W.B. McClanahan and Associates. “Once the scenario and unit mix discussion was completed, I received an e-mail with the final copy.”
To schedule a Virtual Design Studio appointment with U.S. Door, For further details, Call 352 243 0180.
U.S. Door & Building Components has been a major international supplier to the self-storage industry for over 30 years. In addition to supplying Roll-Up doors, they offer a complete portfolio of related products including hallway and corridor systems, swing doors, lockers, EZ Access wicket doors, relocatable buildings and mezzanine systems. All products are available with factory-guaranteed installation.
US Door & Building Components Showcasing a New Logo
U.S. Door & Building Components has established a new company logo.
“Our branding message as a global leader in self-storage solutions is more predominant with our new logo. It reflects our broad product line more effectively by making Building Components a larger portion of the overall design”, said John McLane, President of U.S. Door & Building Components.
The logo will begin appearing in advertisements, case studies and other public relations starting immediately.U.S. Door & Building Components is slated to introduce in 2008 an expanded commercial door line and will continue to develop its building component solutions.
U.S. Door & Building Components has been a major international supplier to the self-storage industry for over 30 years. In addition to supplying roll-up doors, they offer a complete portfolio of related products including hallway and corridor systems, swing doors, lockers, EZ Access wicket doors, relocatable buildings and mezzanine systems. All products are available with factory-guaranteed installation.
US Door Stackable Locker Systems
US Door & Building Components, “A Building Products Specialty Company” is an international supplier of self-storage and building components, including one of the newest additions to our line of building and storage systems, our Stackable Locker Systems. These easy to assemble Do It Yourself kits can be individually boxed and shipped for quick delivery. Manufactured completely out of pre-painted galvanized steel with factory pre-punched bolt locations for quick and consistent assembly. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For more information on this and all of our building and storage systems call For further details, Call 352 243 0180
US Door Value Storage Hallway Systems
US Door & Building Components, “A Building Products Specialty Company” is an international supplier of self-storage and building components, including our proven Value Storage Interior Hallway Systems. This system features our corrugated or flush, pre-painted galvanized steel panels. All of our hallway systems are built to your specifications for that specific custom look. All of our hallway systems feature full width top and bottom channels as well as multiple stiffeners and braces to deliver the strongest hallway system possible. Services include engineering, design, bid take-off, and unit mix layout. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For more information on this and all of our building and storage systems For further details, Call 352 243 0180
US Door ACCESS-A-DECK MEZZANINE SYSTEMS
US Door & Building Components is an international supplier of light-gauge steel building components, rolling steel doors, wind load certified doors, interior hallway and corridor systems, garage storage systems, stackable storage lockers, portable storage buildings, structural pier/header systems, and structural mezzanine systems.
The Access-A-Deck Structural Storage & Mezzanine Systems can be configured to fill an entire warehouse or just a portion for that additional custom storage space needed. The Full Mezzanine System is engineered to maximize the total number of rental units, while only requiring an unobstructed minimum eve height of fifteen feet with a suitable floor structure. The Island System, which best utilizes existing HVAC & Lighting typically found in warehouses today, can be joined with bridges and material lifts to provide convenient access to every unit. The Access-A-Deck Storage System was designed to provide clean and secure self-storage in a typical commercial warehouse application. These structural mezzanine designs are engineered on a 10’ by 10’ grid allowing for a 125 PSF floor load rating to be achieved. In addition, most systems qualify as re-locatable racking or storage systems making these mezzanines eligible for accelerated depreciation. With increased rental cash flow and early depreciation, Access-A-Deck Mezzanine Systems make sense.
Services include engineering, design, bid take-off, and unit mix layout. US Door manufactures their products in two facilities Orlando, FL and Mesa, AZ. US Door sells and installs products throughout the United States and Europe. Let US Door & Building Components design and install a custom storage system to fit your specific application. For further details, Call 352 243 0180
US Door Introduces Model 502 Door for the Self Storage and Retail Markets
US Door & Building Components has introduced the Model 502 Roll-Up Door for the self-storage and the retail do-it-yourself consumer markets. While the new Model 502 Door is similar to the current line of self-storage roll-up doors offered by US Door, the new door has a fully enclosed barrel and new easy to adjust tension device.
The Model 502′s new galvanized steel barrel surrounds the axle, drums and a fully lubricated spring assembly. The state-of-the-art US Door barrel provides even lifting along the width of the door opening and a protective barrier against barrel dents.
The Model 502 Roll-Up Door is easy to install, operate maintain. The door comes in 22 pre-finished colors and has a finished clean look. The door is available in a variety of sizes to fit all applications.
The new door will supplement US Door’s self-storage product line, including the existing Models 501, 501-23, 501-30 and 566 Self Storage Roll-Up Doors. A Windload Rated version of the new door is available, the Model 502-30.
The new Model 502 Door can be mounted to wood, masonry, or steel jambs. Available for areas of up to 100 square feet, 10 feet (32.8 m) wide by 10 feet (32.8 m) high, the Model 502 looks just like other US Door models, allowing its use with other models on the same project.
The Model 502 optional features include: electric operators to provide maximum opening convenience and effortless operation; the hoist offers an economical alternative to manually operated doors.
The applications for US Door products are various as they can be used on a variety of projects including residential, agricultural, retail, educational or other steel building projects. Smooth operation, easy installation and reliable performance, and nationwide distribution will make the Model 502 the go-to door of choice for customers.
For further details, Call 352 243 0180
Roll Up Doors Direct 1-352-243-0180
Roll Up Doors Direct
www.RollUpDoorsDirect.Com
Add comment May 1st, 2008
Welcome to Ultimate Garage Direct Direct!
SPECIAL OFFER. CALL TODAY FOR $50.00 WORTH OF ACCESSORIES WHEN YOU PURCHASE OUR INSTALLED WALL OR FLOOR SYSTEM.
THE NEXT GENERATION OF GARAGE AVAILABLE TODAY FROM ULTIMATE GARAGE DIRECT.
Telephone:1-352-243-0180 Toll Free: 1-877-RLDOORS Toll Free 1-877-753-6677
“We sell Garage Storage Systems to You At Factory Direct Pricing”
INTELLIGENTLY DESIGNED organization for home, office, and workspace. Combine FLOW smart hooks, brackets, shelves, bins, and cabinets with FLOW WALL PANELS to create versatile, personalized and functional space.
Made In The US.
We are glad to have you on our website, and even happier to demonstrate why our garage storage systems are the state of the art highest performance systems on the market today.
We are a US based company that specializes in garage storage systems and would like to tell you about our line of products.
Thousands and thousands of garages are in operation all over the world, every day of the year.
Our products are special because they are made of good quality components.
Delivering a high quality cost effective product is our standard and that is just why our storage systems have been chosen by many companies, small and large.
In the years that we have been selling our products we have made a good name for ourselves in countries around the world.
Explore our site by system or product style and get an even more in-depth view of our product range in real world conditions, meeting real world garage storage solutions!
On this web site you will be able to see our price list and brochure’s.
If you would like to place an order or receive more information about our garage storage systems, please use our web site, or contact us by telephone. 1-877-RLDOORS.
Add comment May 1st, 2008
Value Storage Hallway Systems Roll Up Doors Direct Component’s Value Storage Hallway Systems have grown to become the self-storage industry benchmark in custom hallway and corridor systems provider. Built around our flush, gloss white 20 gauge non-structural piers and headers to provide one of the strongest hallway systems in the industry. With endless design possibilities and numerous options available such as: chamfered corners, diamond plate aluminum kick plates, diamond plate aluminum corner guards, lighting soffits, built in locker units, flush swing doors, multi-floor Access-A-Deck Mezzanine Systems, and even stackable wine storage. Our Value Storage Hallway Systems can provide you with the custom solution you’re looking for. Whether it’s new construction, mezzanine, or interior conversion we have a solution for your situation.
Call 352-243-0180 To-Day.
Value Storage Flush Series Gloss White Flush Hallway Panels Top Cap “J” Channel Optional Corner Guards Continuous Floor Channels Flush Filler Panels Flush Opening Piers Optional Kickplates Roll Up Door Flush Swing Door Panels Flush Swing Doors “Cee” Chanels Unit Security Walls Value Storage Corrugated Series Corrugated Hallway Panels Top Cap “J” Channel Optional Corner Guards Continuous Floor Channels Corrugated Filler Panels “Cee” Channels Corrugated Hallway Panels Roll Up Door Corrugated Swing Doors Flush Swing Doors Unit Security Walls Optional Hallway Security Components Hallway Soffit Burglar Bars Security Mesh
Roll Up Doors Direct 1-352-243-0180
Roll Up Doors Direct
www.RollUpDoorsDirect.Com
1 comment May 1st, 2008
Roll Up Doors Direct manufactures a full line of pre-engineered easy to assemble structural steel building components. Manufactured form 16 gauge galvanneal steel and available ready to paint, pre-painted satin white, or pre-painted lightstone tan. Our Sure Fit Bolt-Together System has pre-punched bolt holes allowing for savings on material and labor costs.
Roll Up Door Direct METAL BUILDING QUOTE Form Please fill out the form with the details of your request.
Add comment May 1st, 2008
Welcome to Roll Up Doors Direct!
THE NEXT GENERATION OF DOORS AVAILABLE TODAY FROM ROLL UP DOORS DIRECT. WHERE MORE IS LESS.
Telephone:1-352-243-0180
Toll Free: 1-877-RLDOORS
Toll Free 1-877-753-6677
“We sell Roll Up Doors Direct to You At Factory Direct Pricing”
In need of a single roll up door for your shed building or supplying a complete mini storage facility, Buy Doors Direct can ship any amount of doors directly to your job site. Mini storage doors, Commercial Heavy Duty Roll up Doors, Hallway systems for climate controlled storage facilities, Soffit Systems, Wind Certified Roll Up Doors designed to 150 mph wind, Buy Doors Direct can deliver from two strategically located US Door plants in Orlando, FL. and Mesa, AZ.
Made In The US. Ready To Buy Go To Step 5 Now.
This video shows how easy it is to fit one of our doors, it should be veiwed in conjunction with the installation manual.Total time 4min 50sec.
We are glad to have you on our website, and even happier to demonstrate why our roll up doors are the state of the art highest performance roll up doors on the market today.
We are a US based company that specializes in making roll up doors and would like to tell you about our line of products.
Thousands and thousands of our roll up doors are in operation all over the world, every day of the year.
Our products are special because they are made of good quality components.
Delivering a high quality cost effective product is our standard and that is just why our doors have been chosen by many companies, small and large.
In the 10 years that we have been selling our products we have made a good name for ourselves in countries around the world.
Explore our site by door or product style and get an even more in-depth view of our product range in real world conditions, meeting real world roll up door solutions!
On this web site you will be able to see our price list and brochure’s.
If you would like to place an order or receive more information, please use our web site, or contact us by telephone. 1-877-RLDOORS.
Roll Up Doors Direct, we sell Self storage roll up doors, commercial rollup doors and industrial roll-up doors direct to you.
Follow these steps to find the correct size door:
Step 1: Measure for your door.
Step 2: Check door clearance.
Step 3: Find delivery zone.
Step 4: Choose color.
Step 5: Order correct size door.
Welcome to the Roll Up Doors Direct web site, high quality, factory direct pricing with all the extras included.
Roll Up Doors Direct are proud to be part of the FSSA and to offer its members products manufactured in Florida.
Thank you for visiting Roll Up Doors Direct!
Telephone:1-352-243-0180
WWW.ROLLUPDOORSDIRECT.COM
Call 1-352-243-0180 For Savings On: roll up doors, rollup doors, steel door, doors, door manufacturer, mini storage,roll door,roll up garage door, roll up garage doors, roll up metal doors, roll up shed door, roll up shop doors, roll up steel doors, roller door, rolling door. September House USA LLC.
Add comment May 1st, 2008
© Copyright 2012 Buy Doors Direct. All rights reserved.
Blix Theme by Sebatian Schmieg. Icons by Kevin Potts . Powered by WordPress . Log in
